Metal Industries is an ISO certified international trader company exporters and stocking metal service of valve, check valve, ball valves, industrial valves, flow control valve, globe valve, gate valve, butterfly valves, control valves, 3 way ball valve, needle valve, Power Station Valves, Plug Valve, Y-Type Strainer, Stainless Steel Valve from India
A butterfly valve is a rotary motion valve. The main purpose of butterfly valve is used to stop, regulate, and start fluid flow. This type of valve is easily and quickly operated because there is a 90 degree rotation of the handle which moves the disk from a fully closed to fully opened position. Butterfly valves are available in various sizes and materials. Infact, the larger sized butterfly valves are actuated by hand wheels which are connected to the stem through gears and they provide mechanical advantage at the expense of speed.
Parts of a butterfly valve:
The butterfly valve consists of only five main components. They are as follows:
- Body: These valves have bodies that fit between two pipe flanges.
- Disc: The disk is the flow closure member of a butterfly valve.
- Stem: The stem of the butterfly valve is either a one-piece shaft or a two-piece, also known as split-stem design.
- Seat: The seat of a butterfly valve utilizes an interference fit between the disk edge and the seat to close or to shutoff.
- SOperator
|
Following the complete list:
D71X wafer soft seat butterfly valve
Flanged type three offset Butterfly valve
Lug type double offset Butterfly Valve
Tripe Eccentric Butterfly Valve
Sleeve Type Soft Sealing Plug Valve Acc.To ANSI |
 |
Uses of Butterfly valves:
Butterfly valves are considered to be the most economical and reliable type of pipe valves. Technological innovations combined with the simple design of the butterfly valve has made it a dependable, economical and flexible solution to a variety of industrial flow control needs. These valves have many advantages over other valves like gate, globe, plug, and ball valves, especially in large valve applications. The most obvious advantages are savings in weight, space, and cost. The maintenance cost is low because there are a less number of moving parts and there are no pockets to trap fluids. They are widely used in water distribution and waste water processing.
Flanged type three offset Butterfly valve :
Specification:
Structre type:double flanged three eccenticity
Design standard:API609-83
lange connection dimension:ANSI B 16.5
Flange drilling:ISO5211.
Structure length:ANSI B 16.10-1992
Pressure test:API 598-82
Materials
Body: WCB,CF8M
Dise: WCB,CF8M
Stem: 416Cr13Cr18Ni9Ti
Seal ring: 316, Fluorine plast
Packing: Flesxible graphite, fluorine, plastic
Lug type double offset Butterfly Valve:
Specification:
- Structure type: Double eccentric wafer butterfly valve
- Design standard: API609-83
- flange connection dimension: DIN2501(DIN2534＿ISO2084)
- Structure length: DIN3202-K1,BS5155,
- ANSI B16.10,MSS SP-67
- Pressure test: API 598
-
- Materials:
- Body: WCB,CF8M
- Dise: WCB,CF8M
- Stem: 416Cr13Cr18Ni9Ti
- Packing: Flesxible graphite, fluorine, plastic
This kind of butterfly valve is widely utilized in foodstuff,pharmacy, chemical industry etc.and industrial environmental protection, water treatment, high building, water supply and drain tubing line open or close or adjusting medium
Tripe Eccentric Butterfly Valve :
Sleeve Type Soft Sealing Plug Valve Acc.To ANSI :
Main structural features:
Bolt cover,plug 90 degree around.
Its sealing is realized by the sealing face around the sleeve.It has unique 360 degree metal edge for protection and fixing of the sleeve.There is no cavity in the valve for accumulation of medium.Metal edge provides the function of self-cleaning when the plug is rotated,applicable to the operation condition thatis glutinous and apt to smudge.Double direction.
Standards compliance:
Design and Manufacture: API 599,API 6D
Face to face(end to end): ANSI B 16.10
Flanged connection: ANSI B16.5
Test and inspection: API 598,API 6D
Main pants materials:
Sleeve type soft sealing plug valve
ANSI Butterfly valve:Class 150LB-300LB SIZE 2"~60
DIN Butterfly valve:DN50-DN600, PN10~PN25
JIS Butterfly valve:DN50-DN600 10K~20K
BS Butterfly valve:DN50 -DN600, PN10~PN25
Design & Manufacture Standard:API600, API 6D,ASME B16.34, JISB2071, JISB2073,JISB2083, BS 1873,BS1414
Face to Face Standard: ASME B16.10,DIN 3202,BS2080, API 6D, JISB2002
End Connection Standard:ASME B16.11,ASME B1.20.1,ASME B16.5, DIN2543-2550 ,JISB2212-JISB2214
Test Standard:ISO5208,BS 6755, API598,API 6D,JISB2003
Material:WCB,LCB,WC6,WC9,C12,C5,CF8,CF3,CF3M,CF8M,A105,LF2,F11,F22,F5,F304,F316,F304L,F316L
