|
Metal Industries is an ISO certified international trader company exporters and stocking metal service of Weld neck Flanges, Stainless Steel Weld neck Flanges, Duplex Steel Weld neck Flanges, Carbon Steel Weld neck Flanges, Alloy Steel Weld neck Flanges, SS Weldneck Flanges, Steel Weld neck Flanges, CS Weld neck Flanges, AS Weld neck Flanges, Nickel Weld neck Flanges, Copper Alloy Weld neck Flanges, ASTM A-20, BS 3059, SA 179, IS 1239, 3589 India.
|
: : Pipe Flanges : :
Weldneck Flanges
 Weld Neck Flanges are drilled(machined) with the wall thickness of the flange having the same dimensions of the matching pipe, the lighter the pipe is, the larger the bore, conversely, the heavier the pipe, the small the bore, they are normally used for highpressure, cold or hot temperature
Notes :
Flange dimensions to ANSI B16.5.
Dimensions "B" & "D" includes raised face thickness.
Bore (SCH) "C" purchasess to Specity.
Larger outlet sizes are avilable on applications.
ANSI 150# / 300# 2mm Raised Face.
ANSI 600# / 2500# 7mm Raised Face.
Materials used:
NW Long Weld Neck Flanges
- Specifications:
Tube OD sizes: 3/8 to 2 inches
Materials:
Flange: 304 or 316L stainless steel
O-rings: Viton, Buna, & silicone
Fasteners: Wingnut, SureSeal,
bulkhead & EVAC clamps
Vacuum range
Elastomer seal: >=1 x 10^-8 Torr - High vacuum
EVAC metal seal: >=1 x 10^-11 Torr - UHV
Temperature range
Viton: -20°C to 200°C
Silicone: -50°C to 230°C
Buna: -30°C to 110°C
EVAC metal seal: -270°C to 150°C
Key Features:
Uses of weld neck flanges:
- The weld neck flange is very resistant to dishing and has a very sturdy connection because it has the pipe along with the tapered hub.
- The flanges are ideal for extreme fluctuations of temperature.
- They are ideal in environments where there may be a lot of bending and handling of the flanges.
- Preferred in an environment with extreme temperature conditions.
- This type of flange is preferred for every severe service condition—resulting from high pressure or from sub-zero or elevated temperature.
- They are used in situations where loading conditions are substantially constant or fluctuate between wide limits.
- This is probably the best welding flange available because of its high, heavy neck.
- Highly recommended wherever a sound welded joint connection is needed.
Materials :
Nickel Alloy Weld neck Flanges
Standard:
• ASTM / ASME SB 564 / 160 / 472
|
• UNS 10276 (HASTELLOY C 276 Weld neck Flanges) |
• UNS 2200 (NICKEL 200 Weld neck Flanges) |
• UNS 2201 (NICKEL 201 Weld neck Flanges) |
• UNS 4400 (MONEL 400 Weld neck Flanges) |
• UNS 8020 (ALLOY 20 Weld neck Flanges) |
• UNS 8825 INCONEL 825 Weld neck Flanges) |
•
UNS 6600 (INCONEL 600 Weld neck Flanges) |
•
UNS 6601 (INCONEL 601 Weld neck Flanges) |
• UNS 6625 (INCONEL 625 Weld neck Flanges) |
Copper Alloy Weld neck Flanges
ASTM / ASME SB 61 / 62 / 151 / 152.
C 70600 (CU -NI- 90/10) - Cupro Nickel Weld neck Flanges
C 71500 (CU -NI- 70/30) - Copper Nickel Weld neck Flanges
UNS NO. C 92200, UNS NO. C 83600, UNS NO. UNS NO C 10100,
C 10200, C 10300, C 10800, C 12000, C 12200
Duplex Steel Weld neck Flanges
ASTM / ASME A/SA 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61.
Alloy Steel Weld neck Flanges - AS Weld neck Flanges
ASTM SA 182 F1/F5/F9/F11/F22/F91
Carbon Steel Weld neck Flanges - CS Weld neck Flanges
ASTMA 105 Gr. F42/46/52/56/60/65/70
Low Temperature Carbon Steel Weld neck Flanges - LTCS Weld neck Flanges
A350 LF2/A350 LF3
Value Added Services
• Hot Dip Galvanizing • Electro polish
Test Certificate
Mill Test Certificate as per EN 10204 / 3.1B
Duplex Stainless Steel :
Duplex Stainless Steel Weld neck Flanges – Duplex SS Weld neck Flanges
ASTM A 182 – Weld neck Flanges
F 51 UNS S31803 Weld neck Flanges
S32750 Weld neck Flanges
S31500 Weld neck Flanges
ASTM / ASME A/SA 182 UNS Weld neck Flanges
F 44 Weld neck Flanges
F 45 Weld neck Flanges
F51 Weld neck Flanges
F 53 Weld neck Flanges
F 55 Weld neck Flanges
F 60 Weld neck Flanges
F 61 Weld neck Flanges
Copper Nickel Weld neck Flanges – Cu-Ni Weld neck Flanges |
